Our Shop
Contact us for all your questions and requirements
PNEUMATIC ACTUATED VALVE MANUFACTURERS IN GERMANY
Valvesonly Europe one of the largest Pneumatic actuated valve manufacturers in Germany, offers a large selection of premium valves for a range of industrial uses, such as water treatment, chemical processing, oil and gas, and power production. Pneumatic actuated valves are perfect for high-pressure and high-temperature settings because of their dependable operation and fast reaction times.
When accurate and dependable flow control is needed in industrial systems, pneumatically operated valves are crucial parts. Since pressurized air is used to operate these valves, they are extremely effective and appropriate for dangerous settings where electric actuators could be dangerous.
Electric Actuated and Pneumatic Actuated Valves: A Comparison
Pneumatic and electric actuated valves work in a different manner and have different mechanisms of actuation. Electric actuated valves are suitable for remote operation and where there is a need for precise control since they employ an electric motor to drive the valves. They function best when there is no compressed air. Compressed air is utilized to actuate pneumatic actuated valves, making them quicker and ideal for dangerous situations. Whereas electric actuators are more readily programmable and controlled remotely, pneumatic actuators are more tolerant of higher pressures and temperatures.
Pneumatic Actuated Ball Valve:
A ball valve with a pneumatic actuated mechanism contains a ball that has an opening in its middle, regulating fluid flow. On receiving the signal, compressed air turns the ball to allow or shut off the flow pathway. Pneumatic actuated ball valves find broad application where rapid shut-off and tight seal are needed. They have very low pressure drop and can work well in both high and low-pressure systems.
Working:
For delivering mechanical motion, compressed air is used on the pneumatic actuated valve. The actuator pushes pressurized air into the actuator chamber once it has been given the control signal. The actuator piston or diaphragm is driven by the pressure force of the compressed air, which indirectly results in opening or closing of the valve stem. One can mechanize flow regulation by crafting the actuator to react to variations in temperature, pressure, or flow rate.
Guide to Installation:
Pneumatic actuated valves need proper installation in order to operate to the best:
Selection: In relation to fluid type, operation pressure, and temperature, choose the corresponding valve type and material.
Preparation: Prevent by piping up to eliminate filth and sludge.
Positioning: On installation, position the valve where the flow direction indicated on the valve body shows.
Actuator Connection: The pneumatic actuator must be attached to the supply of compressed air.
Testing: Check the proper opening and closing of the valve by conducting a functional test.
Calibration: To achieve precise flow control, adjust the parameters of the actuator.
Last Check: Ensure there are no leaks and that the connections are firm.
Types:
Pneumatic Actuated Ball valve
Pneumatic Actuated Gate valve
Pneumatic Actuated Butterfly valve
Pneumatic Actuated Knife Gate valve
Advantages:
Fast response time
Adjustability to varying conditions
Need low maintenance
Withstand high pressure and temperature fluids
Reliable
Cost effective
Industries:
Oil and Gas Industry
Chemical Industry
Petrochemical Industry
Mining Industry
Marine Industry
Description:
Available Material: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M, F55, F51, F53, Monel, Ductile Iron, Stainless Steel [SS316, SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91]
Class: 150-2500, PN6-PN450
Ends: Flanged, Socket weld, Butt weld, Lug, Wafer, Threaded.
Operations: Pneumatic Actuated
Configuration of a Pneumatic Actuator:
Torque – 3 – 9000 nm
Operating pressure- 8 Bar
Port Connection-NPT1.4”
Mounting Base-ISO5211
Temperature–20°C – +80°C
Pneumatic actuated valves play a critical role in automated flow regulation in industrial applications, providing rapid response, security, and durability. Their potential to work under hazardous conditions and sustain high pressure and temperature is perfect for use in different industries. As a reliable Pneumatic actuated valve manufacturers in Germany, Valvesonly Europe supplies top-quality valves designed to handle the most demanding operating conditions. Our dedication to quality, technical proficiency, and customer service makes us the first choice for industrial flow control solutions.
Showing 1–16 of 18 results